Ce Hammer Crusher for Making Sawdust

• Customization: Available
• Power: 75kw
• Capacity: 1.5-2.5t/H
• Model NO.: GXPS65*75
• Model: Gxps65*75
• Warranty: 1 Year
• Color: Customer′s Requirement
• Usage: Crush Biomass Material
• Product Name: Ce Hammer Crusher for Making Sawdust
• Type: Hammer Crusher
• Object: Wood
• Drive: Electric
• Crushing Degree: Fine Grinding Machine
• Crushing Style: Extruding and Milling
• Principle: Fixed Culling
• Cutter Material: High-Speed Steel
• Finished Surface: Outer Surface Process
• Compressive Strength (For Crushing): >300MPA
• Tongs′ Features: Adjustable Tongs
• Transport Package: Standard Export Package
• Specification: 2400mm*1195mm*2185mm
• Trademark: Kingoro
• Origin: China

Product Description

Product Description

                                            CE Hammer Crusher For Making Sawdust
product profile
The single shaft hammer mill is widely used in crushing various biomass wood waste and straw material. The motor and the hammers are directly connected by the coupling. There is no dead angle during the crushing so the finished product is very fine. The corners of the hammers are welded with high hardness material like carbon tungsten alloy. The welding layer thickness is around 3mm. The lifetime is 7- 8 times by normal 65Mn overall quenching hammer. The rotor has made the balance test and can work backward. It's the best choice to prepare milled material for pellet machine.
working priciple
The raw material is fed through the hopper to the hammer mill.By the violent impact with the high-speed hammer,the raw material is dragged to the acceleration area where the pellet speed could be raised to the level of the hammer end line speed. The pellet will make circling motion with the hammer together,and the material converter layer appears so that the raw material could be further crushed.Finally the crushed material will be discharged out of the machine.
product advantage
1.The single shaft hammer mill adopt the steel plate welding structure,which can ensure the whole body can be sealed totally,and avoiding the output of the dust, providing a good working enviroment.
2.Motor and pellet machine use drum-type coupling connect directly,with the rotor inside,which can crush raw material completely,also the finished particles are even in size.
3.Beating hammer with symmetrical uniform arrangement,insure tne small vibration and no missed raw material,and can make wide grinding friction area.The back of the sieve has the wear-resistant  materials,with big rap angle.Hammers are in a seperate design and are equipped with fixed parts for installing or disassembly.The blade after processing,with good wear resistance and long life-time.
4.The rotor has made the balance test and can work backward.
5.The operating door has a device of safety interlock to ensure that the operating door cannot be opened when the machine is running.
6.The pneumatic transmission is faster,and wind resistance reach to a minimum level,fully realize the efficiency of the fan.The arc side door which is convenient for observing and replace the screen,also can control the dust are not flying out in different direction.

Applicable Materials


All kinds of biological stalks, (such as corn stalk, wheat straw, cotton stalk), rice straw, rice shell, peanut shell, corn cob, Small pieces of wood, sawdust, branches, weeds ,leaves, bamboo products and other waste.
Finished Sawdust

Specification

Model	Power(Kw)	Capacity(t/h)	Weight(t)
GXPS65*55	55	1-2	2.2
GXPS65*75	75	1.5-2.5	2.6
GXPS65*100	110	2.5-3.5	2.9
GXPS65*130	132	3.5-4.5	3.3

Product Details

Sieve Mesh
The bottom diameter of screen is 6mm-12mm, thickness is greater than 4mm.

Rotor Group
The motor and the hammers are directly connected by the coupling. 
There is no dead angle during the crushing so the finished product is very fine. 
The rotor has made the balance test and can work backward.

Hammer
The corners of the hammers are welded with high hardness material like carbon tungsten alloy. The welding layer thickness is around 3mm. The lifetime is 7- 8 times by normal 65Mn overall quenching hammer.

Our Company

FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 20-45 days if the goods are not in stock, it is according to quantity.

Q: How long is your guarantee?
A: 12 months warranty but except quick wearing parts.

Q: Will you send engineers to install the machines?
A: Of course. our company has professional installation engineers team and specialized after-sale service team. when the machines arrive your factory, we will send our installation engineers to your factory.
Our engineers will guide you to install the machines and training your workers how to operate the machines and maintain the machine.


If you have another question, pls feel free to contact us:

Sally